Expand your telephone system

Add and register expansion handset

You can add new cordless handsets (SN5107, purchased separately) to expand your telephone system. Your telephone base supports a maximum of four cordless handsets.

Additional handsets are assigned numbers in the sequential order.

Charge the new handset without interruption for at least 30 minutes before registering it to he telephone base.

After charged, each expansion handset displays To register HS, see manual.

NOTES

  • You cannot register a handset if any other system device is in use.

  • Only one handset can register to the telephone base at a time.

To register a SN5107 handset:

  1. When the telephone is not in use, press and hold PAGE/INTERCOM at the telephone base for about five seconds until the visual ringer indicator light turns on. Release PAGE/INTERCOM.

  2. Press the pound (#) key on the handset. The handset displays Registering... Please wait.

The handset show Handset X Registered and you hear a beep when the registration process completes. The registration process takes about 60 seconds to complete.

If the registration fails, the handset displays Registration failed, and then To register HS, see manual. Remove the handset from the charger and repeat the registration process again.

Add and register photo speed dial handset

You can add a new photo speed dial handset (SN5307, purchased separately) to your telephone system. The SN5307 cordless photo speed dial handset lets you quickly dial one of the four preset numbers by just pressing the photo speed dial key.

If you have already set the photo speed dial keys 1, 2, 3 and 4 on the telephone base, the same numbers will be automatically set for the dial keys of your newly registered photo speed dial handset.

You can register a maximum of four cordless handsets.

NOTES

  • You cannot register a handset if any other system device is in use.

  • Only one handset can register to the telephone base at a time.

To register a SN5307 handset:

  1. When the telephone is not in use, press and hold PAGE/INTERCOM at the telephone base for about five seconds until the visual ringer indicator light turns on. Release PAGE/INTERCOM.

  2. Put the handset in its charger. The handset CHARGE light alternates red and green quickly to indicate the registration is in progress.

You hear a beep when the registration process completes. The registration process takes about 60 seconds to complete.

If registration fails, you hear an error tone, and the CHARGE light alternates red and green slowly when it is taken out of the charger. Start again from Step 1 above.

Add and register new device

You can add VTech compatible Cordless audio doorbell and ULE Wearable home SOS pendant (SN7021 and SN7022, both purchased separately) to your telephone system.

The Cordless audio doorbell (SN7021) helps you get notified at your telephone system upon visitors’ arrival. When a visitor presses the Audio doorbell, both the base and the handset will play the chime tone, and you can then answer the doorbell call and talk to the visitor at your door with the handset or base. For operation instructions, see Audio doorbell.

VTech compatible ULE devices

The ULE Wearable home SOS pendant (SN7022) function as same as the SOS button of your cordless handset. It acts as a handy pendant to let you quickly call the preset SOS numbers for help in an emergency, even when your telephone is beyond your reach. For detailed setups and operations, see Set SOS emergency call, and Make SOS emergency call.

NOTES

  • You can add a maximum of two Cordless audio doorbells and 30 compatible ULE devices to your telephone base.

  • You need to register your newly purchased devices to the telephone base before use.

  • Make sure the new devices are powered on with batteries or with AC power before registering them to the telephone base.

Register an Audio doorbell (SN7021)

  1. When the telephone is not in use, press and hold PAGE/INTERCOM at the telephone base for about five seconds until the visual ringer indicator light turns on. Release PAGE/INTERCOM.

  2. Press and hold the pair button on the back of the audio doorbell until the chime button LED light flashes, then release the button. When registration is successful, the chime button LED light becomes steady on, and then the base beeps once.

It takes up to 60 seconds to complete the registration. When the registration is successful, the chime button LED light on the front of the Audio doorbell turns to steady on, and the telephone base beeps and its visual ringer indicator light turns off.

If registration fails, start again from Step 1 above.

For detailed installation and operation instructions, see Audio doorbell and the user’s manual of your Cordless audio doorbell.

Register a Wearable home SOS pendant (SN7022)

  1. When the telephone is not in use, press and hold PAGE/INTERCOM at the telephone base for about five seconds until the visual ringer indicator light turns on. Release PAGE/INTERCOM.

  2. Press and hold CANCEL on the back of the SOS pendant until the LED light on the front flashes, then release the button. When registration is successful, the LED light turns off, and then the base beeps once.

It takes up to 60 seconds to complete the registration. When the registration is successful, the red LED lights on the SOS pendant turns off, and the telephone base beeps and its visual ringer indicator light turns off.

If registration fails, start again from Step 1 above.

For detailed installation and operation instructions, see SOS emergency call and the user’s manual of your Wearable home SOS pendant.